18
Ordercode: 50710
SC-2412
Delete All Scenes/Chases
01)
While holding down the record/shift (14)
button, tap the flash (03) buttons #1-3-2-
3 in sequence.
02)
Press and hold down the record/shift (14) button and tap the
add kill/rec exit (12) button.
Notes
●
You must be in Record mode to reset the controller.
●
The LED above the record button will light up, indicating that Record mode is active.
●
Parameters can be edited while a chase is running.
This action will reset the controller to its factory default settings.
This will erase all programs and settings.
Delete a Scene/Chase From Temporary Memory
01)
If you are not satisfied with a chase, while programming, (as described on pages 15-16: Create a
Scene/Chase), you have the option to delete the chase without leaving Program mode.
02)
Press and hold down the record/shift (14) button while tapping
the page/record clr (08) button. All LEDs will flash, indicating that
the scene/chase is deleted.
Notes
●
All the scenes stored in the temporary memory of the controller will be erased in this process.
●
This process will not affect the scenes already programmed into a scene/chase fader.
Summary of Contents for SC-2412
Page 31: ...30 Ordercode 50710 SC 2412...
Page 32: ...2019 Showtec...