SHOWTEC Polar 340 WashFX, Manual

Page: 36 / 56

35
Order code: 40101
Polar 340 WashFX IP65 Moving Head
7.1. System Error
In this submenu you can view whether there are any system errors.
Press the UP/DOWN buttons to scroll through the following 9 options:
The displayed parameters are:
● MEMORY IC
● ANGLE SENSOR
● PAN SENSOR
● PAN ENCODER
● PAN DRIVER
● TILT SENSOR
● TILT ENCODER
● TILT DRIVER
● TEMPERATURE
If there are no errors, the display will show OK next to the parameter. If there are errors, the display will
show ERROR.
8. Service
In this menu you can calibrate some of the device’s parameters. This submenu requires a password.
01)
Press the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN to enter the password.
02) Press the ENTER button to confirm the password and enter the submenu.
03) Press the UP/DOWN buttons to scroll through the following 5 options:
04) Press the ENTER button to confirm your choice.
05) Press the UP/DOWN buttons to increase/decrease the value or make a selection.
06) Press the ENTER button to set the value or confirm your choice.
The available options are:
●
PAN: Adjustment of the home position of the pan drive. The adjustment range is
between -127 and +127.
● TILT: Adjustment of the home position of the tilt drive. The adjustment range is
between -127 and +127.
● CCT: See 8.1. CCT (Correlated Color Temperature Control)
● Rest Fixture Time: Resets the total hours of operation of the fixture. Select 0 to reset the fixture
time.
● Rest LED Time: Resets the total hours of use of the LEDs. Select 0 to reset the LED time.