28
Order code: 40101
Polar 340 WashFX IP65 Moving Head
●
DMX ERROR:
Polar’s behavior in case of a DMX error. There are 2 options: SAVE (the Polar
will use the last properly received DMX signal which ensures undisrupted
performance) and BLACK (output blackout)
●
DISPLAY ON:
If you choose ON the display will not turn off. If you choose OFF, the display
will turn off after 40 seconds of inactivity
●
DISPLAY LOCK:
See 4.2. Display Lock for more information
●
LOAD PARA:
Upload the parameters of Custom Program 1 and/or 2 from the master
device to the slave device(s) in master/slave mode (NO/YES)
●
SETTING:
See 4.3. Settings for more information
●
NETWORK:
See 4.4. Network for more information
●
PT ENCODER:
If the encoder is turned on (ON), the device will automatically correct the
pan/tilt position, if it deviates from the last saved value (OFF/ON)
●
WDMX RESET:
Resets wireless connection and clears all receiver’s messages (NO/YES)
●
SIGNAL:
See 4.5. Signal for more information
4.1. LED PWM
In this submenu you can adjust the LED’s PWM (Pulse Width Modulation) frequency and the CCT for the
respective frequency level.
01)
Press the UP/DOWN buttons to choose one of the available options: 1200 Hz, 2400 Hz, 4000 Hz,
6000 Hz, or 25000 Hz.
02)
Press the ENTER button to confirm your choice. The menu will show the CCT XY Fine adjustment
screen:
Note: The factory default settings of the CCT (Correlated Color Temperature) are done for the lowest
PWM frequency, in this case – 1200 Hz. When you adjust the PWM frequency, the CCT might change. You
can fine-tune the CCT settings for the chosen PWM frequency at this stage. See 8.1. CCT (Correlated
Color Temperature) on page 36 for more information on how to calibrate the CCT.
Note: If XY OFFSET is disabled in the OPTION menu, the XY fine adjustment of the CCT will not be visible in
the LED PWM submenu. Make sure XY OFFSET is enabled, if you want to adjust this parameter. For more
information see 4. Option on pages 27–28.
03)
Press the UP/DOWN buttons to choose between X FINE and Y FINE.
04)
Press the ENTER button to confirm the selection.
06)
Press the UP/DOWN buttons to increase/decrease the value. The adjustment range is between -200
and +200.
07)
Press the ENTER button to set the value.
4.2. Display Lock
In this submenu you can activate the display lock.
01)
Press the UP/DOWN buttons to toggle between ON and OFF.
●
ON:
Display lock is on. The display will be locked after 35 seconds of inactivity.
After 5 more seconds the display will turn off. To access the Main Menu, you
will need to enter the password. The default password is pressing the
UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN
●
OFF:
The Main Menu remains unlocked after the display turns off
02)
Press the ENTER button to confirm your choice.
Note: Deactivating the display lock does not affect the submenu items which by default require a
password.
Summary of Contents for Polar 340 WashFX
