SHOWTEC Polar 340 WashFX, Manual

Page: 30 / 56

29
Order code: 40101
Polar 340 WashFX IP65 Moving Head
4.3. Settings
In this submenu you can reset some of the device’s parameters.
01)
Press the UP/DOWN buttons to scroll through the following 4 options:
02) Press the ENTER button to confirm your choice.
4.3.1. Recovery
In this submenu you can restore the default factory settings. This submenu requires a password.
01)
Press the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN.
02) Press the ENTER button to confirm the password and start the resetting.
4.3.2. Clean Edit 1
In this submenu you can clear all settings of Custom Program 1. This submenu requires a password.
01)
Press the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN.
02) Press the ENTER button to confirm the password. All changes made in EDIT 1 (see pages 31–32) will be
reset.
4.3.3. Clean Edit 2
In this submenu you can clear all settings of Custom Program 2. This submenu requires a password.
01)
Press the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN.
02) Press the ENTER button to confirm the password. All changes made in EDIT 2 (see pages 31–32) will be
reset.
4.3.4. WDMX Hide
In this submenu you can hide the wireless mode settings in the menu.
01)
Press the UP/DOWN buttons to toggle between:
●
NO: The wireless mode settings (WMDX RESET and SIGNAL) will be visible in the
menu
● YES: The wireless mode settings (WMDX RESET and SIGNAL) will not be visible in
the menu
02) Press the ENTER button to confirm your choice.
4.4. Network
In this submenu you can adjust the network settings.
01)
Press the UP/DOWN buttons to scroll through the following 4 options:
02) Press the ENTER button to confirm your choice.
The available options are:
●
Net SWITCH: Set the starting number of the IP address of the device. You can choose
between 2.x.x.x and 10.x.x.x
● UNIVERSE: Set the universe of the device (0–255)
● IP MODE: See 4.4.1. IP Mode for more information
● CUSTOM IP: See 4.4.2. Custom IP for more information