SHOWTEC Polar 340 WashFX, Manual

Page: 31 / 56

30
Order code: 40101
Polar 340 WashFX IP65 Moving Head
Note: If DEFAULT IP is selected in IP MODE, the CUSTOM IP submenu will not be visible in the NETWORK
submenu. Make sure CUSTOM IP is selected in IP MODE, if you want to configure the IP address manually.
For more information see 4.4.1. IP Mode on page 30.
4.4.1. IP Mode
In this submenu you can choose the IP mode.
01)
Press the UP/DOWN buttons to toggle between the following 2 options:
● DEFAULT IP: The IP address of the device will be generated automatically by the
network server (DHCP)
● CUSTOM IP: The IP address of the device can be configured manually (see
4.4.2. Custom IP). Make sure that this option is selected, in order to have the
CUSTOM IP submenu enabled in the NETWORK submenu
02) Press the ENTER button to confirm your choice.
4.4.2. Custom IP
In this submenu you can configure manually the IP address of the device.
01)
Press the ENTER/BACK buttons to move the cursor respectively to the right/left on the display. The
selected number will be highlighted.
02) Press the UP/DOWN buttons to change the number. The selection range is between 0 and 255.
03) Press the ENTER button to confirm and to move to the next number.
04) Repeat steps 1–3 for each of the 3 editable sections of the IP address. To change the starting
number of the IP address, see 4.4. Network on pages 29–30.
Note: This submenu is visible only if CUSTOM IP is selected in the IP MODE submenu. For more information
see 4.4.1. IP Mode on page 30.
4.5. Signal
In this submenu you can set the signal preferences when wireless DMX is enabled.
01)
Press the UP/DOWN buttons to scroll through the following 3 options:
02) Press the ENTER button to confirm your choice.