31
Performer 1500 Fresnel Q6
Product code: 33130
Mode Setting
In this submenu you can set the device to perform as a master.
Select MODE SETTINGS and press the ENTER button to open the submenu.
Press the UP/DOWN buttons to toggle between the following 2 options:
●
SELF: the device will operate as a stand-alone
●
MASTER: the device will operate as a master in Master/Slave mode
Press the ENTER button to confirm your choice.
XY Offset
In this submenu you can enable the color temperature calibration.
Select XY OFFSET and press the ENTER button to open the submenu.
Press the UP/DOWN buttons to toggle between the following 2 options:
●
HIDE: color temperature calibration will be disabled
●
SHOW: color temperature calibration will be enabled.
Note: If you choose HIDE, it will not be possible to adjust XY offset in such menus as 6.6.9.5. PWM Rate and
6.6.12. CCT. Also, UC menu will not be visible (see 6.6.9.10. UC on page 31 for more information).
Press the ENTER button to confirm your choice.
UC
In this submenu you can calibrate the colors.
This menu will be visible ONLY if XY Offset is set to SHOW (see 6.6.9.9. XY Offset on page 31 for more
information)
Select UC and press the ENTER button to open the submenu.
Press the UP/DOWN buttons to scroll through the static colors: RED, GREEN, BLUE, AMBER, LIME and
CYAN.
Press the ENTER button to open the settings submenu.
Press the UP/DOWN buttons to adjust the color intensity. The adjustment range is 0–255, from low to
high intensity.
Press the ENTER button to set the value and to move to the next color.
Disp Key (Display Lock)
In this menu you can activate the display lock.
Press the UP/DOWN buttons to toggle between ON and OFF.
●
ON: display lock is on. The display turns off if no button is pressed within the preset amount of
time. To access the main menu, you will need to enter the password. The default password is
pressing the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN, ENTER.
●
OFF: the main menu remains unlocked after the display turns off.
Note: Deactivating the display lock does not affect the submenu items which by default require a
password.
Disp Time (Display Time)
In this menu you can set the amount of time that needs to pass before the display turns off, if no button is
pressed.
Press the UP/DOWN buttons to select one of the following options: 10 s/30 s/2 min/ON.
02)
Press the ENTER button to confirm your choice.
