SHOWTEC EVENTSPOT 60 Q7, Manual

Page: 16 / 36

15
Ordercode: 42727
Eventspot 60 Q7
2. DMX Address
With this menu you can set the device’s DMX starting address.
01)
While in the main menu, press the UP/DOWN buttons to choose ADDRESS .
02) Press the ENTER button to open the menu. The display will show:
03)
Press the UP/DOWN buttons to set the desired DMX address. The adjustment range is between 001-
512.
04) The device will remember the DMX address after switching off.
3. Built-in programs
With this menu, you can choose a built-in program or custom program.
01)
While in the main menu, press the UP/DOWN buttons to choose AUTO .
02) Press the ENTER button to open the menu. The display will show:
03)
Press the UP/DOWN buttons to choose one of the 10 uneditable built-in programs (AUTO1-AUTO10)
and 10 presets (PROGRAM1-PROGRAM10) which can be edited in Edit mode (see page 16).
04) If you have chosen one of the programs (AUTO1-AUTO10), press the ENTER button to proceed to the
program speed settings.
05) Press the UP/DOWN buttons to set the program speed. The adjustment range is between 0-255, from
slow to fast.
06) The device will now run the desired built-in program.
07) If you have chosen one of the custom programs (PROGRAM1-PROGRAM10), the device will
immediately run the selected custom program.
4. Personality (DMX channel modes)
With this menu, you can set the desired DMX channel mode (personality).
01)
While in the main menu, press the UP/DOWN buttons to choose PERSONALITY .
02) Press the ENTER button to open the menu. The display will show:
03)
Press the UP/DOWN buttons to toggle between the following DMX channel modes:
HSIC: 7 channels SSP: 10 channels
TOUR: 13 channels TR16: 21 channels