SHOWTEC eventbar 12/3, User Manual

Page: 20 / 32

19
Ordercode: 44110
EventBAR 12/3
2. DMX Mode
With this menu you can set the DMX address and choose a DMX configuration.
01)
Press the MODE button, until the display shows .
02) You can choose 512 different DMX addresses.
03) Press the UP and DOWN buttons to select the required address between .
04) Press the SETUP button to choose a DMX configuration.
05) Press the UP and DOWN buttons to select the required channels:
7 Channels
5 Channels
3 Channels
3. Static Color Mode
With this menu you can create a static color.
01) Press the MODE button, until the display shows .
02) Press the SETUP button to create a specific color.
03) With this submenu you can set 3 static colors of the EventBAR.
04) You can choose between Red , Green or Blue by pressing the SETUP button.
05) Press the UP and DOWN buttons to set the values of each individual color from 000-255.
You can combine Red, Green and Blue to create an infinite range of colors.
4. Power Mode
With this menu you can see the energy level of the lithium battery from the EventBAR.
01) Press the MODE button, until the display shows .
02) Press the SETUP button to see the energy level in %, from 0 - 100%.
5. Settings
With this menu you can unlink the W-DMX and set the EventBAR to its economy mode.
01) Press the MODE button, until the display shows .
02) Press the SETUP button to open the options.
03) To unlink the fixture from the transmitter choose and press the UP or DOWN button to confirm.
The display shows and shows if the fixture is successfully unlinked.
04) Press the SETUP button again to choose between normal ( ) and economy mode ( ).
05) Press the UP and DOWN buttons to choose , the EventBAR will have 100% of the luminance.
06) Press the UP and DOWN buttons to choose , the EventBAR will have 70% of the luminance.