16
Ordercode: 42653
Club Par Dizzy 3/8
3. Color Settings
01)
Press the UP and DOWN buttons until the display shows
.
02)
Press the ENTER button to proceed. The display will show
.
03)
Press the ENTER button to enter the edition mode.
04)
Repeatedly press the ENTER button to toggle between the following color settings:
Red color intensity
0 = OFF, 255 = Full ON
Green color intensity
0 = OFF, 255 = Full ON
Blue color intensity
0 = OFF, 255 = Full ON
UV color intensity
0 = OFF, 255 = Full ON
Strobe speed
0 = OFF, 99 = Fast
Sound-controlled
Note: You can only use 3 colors at a time.
05)
Press the UP and DOWN buttons to adjust the settings above, as required.
06)
Press the ENTER button to save the settings.
4. DMX-512 Mode
01)
Press the MENU button until the display shows
.
02)
Press the ENTER button to enter the menu.
03)
Press the UP and DOWN buttons to choose one of the available DMX channel modes:
3-channel mode
9-channel mode
04)
While the display shows
, press the ENTER button to proceed to the 3-channel mode.
05)
Press the UP and DOWN buttons to set the DMX address between
.
06)
Press the ENTER button to confirm the address.
07)
While the display shows
, press the ENTER button to proceed to the 9-channel mode.
08)
Press the UP and DOWN buttons to set the DMX address between
.
09)
Press the ENTER button to confirm the address.
5. Master/Slave Mode
01)
Press the MENU button until the display shows
.
02)
Press the ENTER button. The display will show
.
03)
The device is now operating in Master/Slave mode. It means that it will react the same as the master
device.
