background image

3

  Make sure that the power-cord is never crimped or damaged. Check the device and the power-cord

from time to time.

  Make sure that no side forces can impact on the truss system.

  Make sure that the rotation of the mirror ball is not interrupted in any way by decoration parts, etc.

  Make sure that, at the installation place, the mirror ball cannot start to swing due to aircurrents, etc.

The mirror ball and the motor should be hung and operated absolutely vibration-free.

  Regulary examine whether the keyring or the chain has any deformations. If you find any,

immediately detach the mirror ball.

  The length of the chain with the mirror ball may never exceed 100 cm.

  If the external cable is damaged, it has to be replaced by a qualified technician.

  If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

  If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.

  If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

  For adult use only. Device must be installed out of the reach of children. Never leave the unit running

unattended.

  The user is responsible for correct positioning and operating of the Standing Mirrorball. The

manufacturer will not accept liability for damages caused by the misuse or incorrect installation of
this device.

  This device falls under protection class III.

  During the initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective.

  Repairs, servicing and electric connection must be carried out by a qualified technician.

  For replacement use lamps and fuses of same type and rating only.

  WARRANTY: Till one year after date of purchase.

CAUTION ! EYEDAMAGES !.

Avoid looking directly into the light source.

(meant especially for epileptics) !

Summary of Contents for 60421











Reviews: