background image

2

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

-

 be 

qualified

-

 

follow  the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.

  Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

  Never remove warning or informative labels from the unit.

  Do not open the device and do not modify the device.

  Do not insert objects into air vents.

  Do not connect this device to a dimmerpack.

  Do not shake the device. Avoid brute force when installing or operating the device.

  Never look directly into the light source.

  Never leave any cables lying around.

  Do not switch the device on and off in short intervals, as this would reduce the device’s life.

  Never use the device during thunderstorms, unplug the device immediately.

  Only use device indoor, avoid contact with water or other liquids.

  Avoid flames and do not put close to flammable liquids or gases.

  Only operate the device after having familiarized with its functions.

  Always replace the lamp, when it is damaged or deformed due to the heat.

  Always allow free air space of at least 50 cm around the unit for ventilation.

  Always disconnect power from the mains, when device is not used or before cleaning! Only handle

the power-cord by the plug. Never pull out the plug by tugging the power-cord.

  Make sure that the device is not exposed to extreme heat, moisture or dust.

  This device is only designed for a standing installation!

  Make sure that the available voltage is not higher than stated on the rear panel.

CAUTION!

Keep this device away from rain and moisture!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Summary of Contents for 60421











Reviews: