SHOWTEC 50396, Manual

Page: 6 / 12

5
Ordercode: 50396
Single DP-1
Description of the device
Features
The Showtec Single DP-1 is a 1-channel DMX dimmer/switch. It is possible to mount the Single DP-1 to any
wall, truss or a fixture which makes it suitable for any location.
●
Input voltage: 230V AC, 50Hz
● Output: 10A Schuko output
● Connections: 3-pin DMX signal connector IN/OUT
● 50 mm dimming fader
● DMX channels: 1 channel
● Housing: Metal & flame retardant plastic
● Color: Gray
● Fuse: F10L/250V
● Dimensions: 100 x 80 x 195 mm (LxWxH)
● Weight: 1,4 kg
Overview
Fig. 01
01)
10A Schuko OUT
Connect a light source.
02) Manual dimming fader (HTP)
Move the fader up and down, to adjust the dimmer brightness.
03) LED d control buttons
04) Fuse F10L/250V
05) 230V AC Schuko power cable (1,25 m)
06) 3-pin DMX signal connector IN
07) 3-pin DMX signal connector OUT
HTP (Highest Takes Precedence)
If the DMX input value is higher than the fader (02) value, then the DMX input will take precedence over
the fader input. Similarly, if the fader (02) value is higher than the DMX input value, then the fader input
will take precedence over the DMX input.