SHOWTEC 50396 Manual Download Page 4

Page: 4 / 12

Ordercode: 50396

Single DP-1

IMPORTANT!

The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.

●

Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!

●

Never remove warning or informative labels from the unit.

●

Never leave any cables lying around.

●

Do not insert objects into air vents.

●

Do not open the device and do not modify the device.

●

Do not connect this device to a dimmer pack.

●

Do not shake the device. Avoid brute force when installing or operating the device.

●

Do not switch the device on and off in short intervals, as this would reduce the system’s life.

●

Only use device indoors, avoid contact with water or other liquids.

●

Only operate the device after having familiarized with its functions.

●

Avoid flames and do not put close to flammable liquids or gases.

●

Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.

●

Make sure that the device is not exposed to extreme heat, moisture or dust.

●

Make sure that the available voltage is not higher than stated on the rear panel.

●

Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.

●

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.

●

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.

●

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.

●

For adult use only. The device must be installed out of the reach of children. Never leave the unit
running unattended.

●

For replacement use fuses of same type and rating only.

●

The user is responsible for correct positioning and operating of the Single DP-1. The manufacturer will
not accept liability for damages caused by the misuse or incorrect installation of this device.

●

Repairs, servicing and electric connection must be carried out by a qualified technician.

●

WARRANTY: Till one year after date of purchase.

Operating Determinations

●

This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.

●

The maximum ambient temperature t

= 35°C must never be exceeded.

●

The relative humidity must not exceed 50 % with an ambient temperature of 35° C.

●

If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.

●

Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.

You endanger your own safety and the safety of others!

Connection with the mains

Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.