SHOWTEC 44060, Manual

Page: 11 / 40

10
Ordercode: 44060
EventLITE 4/10 Q4
Installation
Remove all packing materials from the EventLITE 4/10 Q4 . Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Adjusting the Tilt Angle
It is possible to adjust the tilt angle of the EventLITE.
01)
Press and hold down the bracket button and tilt the EventLITE to the desired position.
Fig. 03
02)
Release the bracket button to secure the EventLITE in position.