SHOWTEC 44060, Manual

Page: 15 / 40

14
Ordercode: 44060
EventLITE 4/10 Q4
Multiple EventLITEs (DMX Control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the EventLITEs and other devices.
04) Link the units as shown in (Fig. 06). Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
05) Make sure the EventLITEs are in “slave” mode.
Multiple EventLITEs DMX Set Up
Fig. 06