8
Helix M1100 Q4 Mobile
Product code: 43750
DANGER
Electric shock caused by short-circuit
This device falls under IEC protection class I.
●
Make sure that the device is electrically connected to ground (earth). Connect the device only to a
socket-outlet with ground (earth) connection.
●
Do not cover the ground (earth) connection.
●
Do not bypass the thermostatic switch or fuses.
●
Do not let the power cable come into contact with other cables. Handle the power cable and all
connections with the mains with caution.
●
Do not modify, bend, mechanically strain, put pressure on, pull or heat up the power cable.
●
Make sure that the power cable is not crimped or damaged. Examine the power cable periodically
for any defects.
●
Do not immerse the device in water or other liquids. Do not install the device in a location where
flooding may occur.
●
Do not use the device during thunderstorms. Disconnect the device from the electrical power supply
immediately.
●
Keep the connectors sealed with the rubber caps when the connectors are not in use.
●
Do not connect the cables from above the connectors, if the device is installed outdoors. Make a
‘drip loop’ in the cable so that rain water cannot enter the device.
WARNING
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at
strobe lights.
Attention
Power supply
●
Before connecting the device to the power supply, make sure that the current, voltage and
frequency match the input voltage, current and frequency specified on the information label on the
device.
●
Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the
required power consumption of the device.
Attention
General safety
●
Do not connect the device to a dimmer pack.
●
Do not switch the device on and off in short intervals. This decreases the device’s life.
●
Do not shake the device. Avoid brute force when installing or operating the device.
●
Change the lens or the LEDs if they are visibly damaged to such an extent that their effectiveness is
impaired, for example by cracks or deep scratches. Contact your Highlite International dealer for
more information, as servicing can be performed only by instructed or skilled persons.
●
If the device is dropped or struck, disconnect the device from the electrical power supply
immediately.
Summary of Contents for 43750
