SHOWTEC 43750, User Manual

Page: 15 / 52

14
Helix M1100 Q4 Mobile
Product code: 43750
4. Installation
Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.
If trussing systems are used, installation must be carried out only by instructed or skilled persons.
Follow all applicable European, national and local safety regulations concerning rigging and trussing.
Personal Protective Equipment
During installation and rigging wear personal protective equipment in compliance with the national and
site-specific regulations.
Installation Site Requirements
● The device can be used outdoors.
● The device can be mounted to a truss or other rigging structure in any orientation.
● The minimum distance between the light output and the illuminated surface must be bigger
than 0,5 m.
● The maximum ambient temperature t
a
= 40 °C must never be exceeded.
Installing the Beamshapers (43745/43746/43747/43748)
01) In order to install the Beamshaper, place it on the lens of the Helix. The Beamshaper is equipped with
multiple magnets which keep it firmly in position.
02) For extra safety, use a safety cable to connect the Beamshaper to the Helix.
43745 – Beamshaper for Helix M1000 Q4 Mobile (20°)
43746 – Beamshaper for Helix M1000 Q4 Mobile (40°)
43747 – Beamshaper for Helix M1000 Q4 Mobile (15°x60°)
43748 – Beamshaper for Helix M1000 Q4 Mobile 90°