11
Menu Overview
Display OFF
Display OFF after 10 sec. Display ON by holding down any
button for 3 seconds.
4CH Mode: CH1=Red, CH2=Green, CH3=Blue, CH4= Dimmer
6CH Mode: CH1=Red, CH2=Green, CH3=Blue, CH4= Dimmer
CH5= Master Dimmer, CH6= Strobe
Slave
20 Macro Colors
9 Built-in Programs
Program Speed from slow to fast
Sound-controlled Mode
Manual Red, from 0 – 100%
Manual Green, from 0 – 100%
Manual Blue, from 0 – 100%
Manual White, from 0 – 100%
The Studiobeam Tour Q4 LED will automatically detect the presence of a DMX signal.
If a DMX signal is present, the DMX LED will blink in the LCD display.
In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3/5-pin DMX
cable and the DMX controller must be turned on.
The Studiobeam Tour Q4 LED system can operate as a 4 or 6-channel DMX fixture.
Slave
Master
1. Display OFF
1)
Press the
MODE
button on the device, until the display shows .
2)
The display will be OFF.
2. Display OFF after 10 seconds
1)
Press the
MODE
button on the device, until the display shows .
2)
The display will be OFF after 10 seconds.
3)
You can light up the display by pressing and holding down any key for 3 seconds.
Summary of Contents for 42486
Page 19: ......
