Ordercode: 30690
Studio Beam CDM/HCI-150
07)
Mounting bracket with inclination screw
08)
Lamp housing
09)
Lens rotation ring
10)
Color frame holder
Backside
Fig. 02
11)
Ground/earth connection
12)
Schuko power cable (1 m)
13)
Fuse T3,15AL/250V
14)
Safety eye
Installation
Remove all packing materials from the Studio Beam CDM/HCI-150. Check if all foam and plastic padding
is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
8
