background image

 

 

 

14 

 

  

 

 

PSA-16A3S 

Product code: 50661 

 

Attention 

 

Do not immerse the device in liquid. 

 

Do not use alcohol or solvents. 

 

Corrective Maintenance 

The device does not contain user-serviceable parts. Do not open the device and do not modify the 
device. 

Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for 
more information. 

8.

 

Deinstallation, Transportation and Storage 

 

Disconnect power supply before deinstallation. 

 

Use the original packaging to transport the device, if possible. 

 

Clean the device before storing. Follow the cleaning instructions in chapter 7.2.1. Basic Cleaning 
Instructions
 on page 13. 

 

Store the device in the original packaging, if possible. 

9.

 

Disposal 

 

 

Correct disposal of this product 

Waste Electrical and Electronic Equipment 

This symbol on the product, its packaging or documents indicates that the product 
shall not be treated as household waste. Dispose of this product by handing it to the 
respective collection point for recycling of electrical and electronic equipment. This 
is to avoid environmental damage or personal injury due to uncontrolled waste 
disposal. For more detailed information about recycling of this product contact the 
local authorities or the authorized dealer. 

10.

 

Approval 

 

 

 

 

 
 
Check the respective product page on the website of Highlite International (

www.highlite.com

) for an 

available declaration of conformity. 
 
 

Summary of Contents for PSA-16A3S

















Reviews: