5
PSA-16A3S
Product code: 50661
2.
Safety
Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
Warnings and Safety Instructions
DANGER
Electric shock caused by dangerous voltage inside
●
Do not open the device or remove any covers.
●
Do not operate the device if the covers or the housing are open. Before operation, check if the
housing is firmly closed and all screws are tightly fastened.
Disconnect the device from electrical power supply before service and maintenance.
DANGER
Electric shock caused by short-circuit
This device falls under IEC protection class I.
Make sure that the device is electrically connected to ground (earth). Connect the device only to a
socket-outlet with ground (earth) connection.
Make sure that the power source is equipped with a residual-current device.
Do not cover the ground (earth) connection.
Do not bypass the thermostatic switch or fuses.
●
Do not let the power cable come into contact with other cables. Handle the power cable and all
connections with the mains with caution.
●
Do not modify, bend, mechanically strain, put pressure on, pull or heat up the power cable.
●
Make sure that the power cable is not crimped or damaged. Examine the power cable periodically
for any defects.
●
Do not immerse the device in water or other liquids. Do not install the device in a location where
flooding may occur.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and
frequency match the input voltage, current and frequency specified on the information label on the
device.
Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the
required power consumption of the device.
Summary of Contents for PSA-16A3S
Page 16: ...2021 Showgear...
