Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
www.shorestation.com
0004405
Page 9 of 12
Rev B 11/05/2013
Hoist Dock Mount Kit Classic Dock
Mount the dock mount tube between the dock and
bumper. Secure the dock
mount tube using a 3/8” X
10-
1/2” j-hook hooking from the bottom of the dock leg
universal bracket up. Secure with a
3/8” wing nut.
Insert the end cap into the ends of the dock mount
tubes.
Mount one (1) hoist attach plate to the winch post
mounting channel using three (3)
3/8” X 1” carriage
bolts. Secure with 3/8” flange lock nuts.
NOTE: The
hoist attach
plate must be hooked over the lip on
the
winch post extrusion.
Place the other hoist
attach plate onto the opposite side of the winch post
extrusion - be sure this plate extends over the lip of
the winch post extrusion before tightening.
Mount the entire hoist by sliding the winch post
mounting channel over the dock mount tube and drop
two 3/8” X 3-1/4” hex bolts down through holes on
winch post mounting channel to secure the hoist to
the dock.
