{9}
Shor-Line | 800.444.1579 |
www.shor-line.com
Step 6
Turn floor right side up
with casters resting on
the floor. See Fig. 2.
notE:
To limit
movement and make
assembly easier, set
the brake on each of
the casters by pressing
downwards.
Attaching 4-Hole Plates
Step 1
Locate two of the 4-hole
plates and four #12x1
"
TEK HX HD screws
included in your hardware.
See. Fig. 3.
Step 2
Using a tape measure,
measure back 2
"
from
the edge of the Floor
Assembly and ¼
"
up from
the bottom of the Floor
Assembly in the front and
back of one side.
notE:
The Floor
Assembly is 48 x 48" so
pick one of four sides to
install 4-hole plates.
Step 3
Using the measurements from steps 2 and the four #12x1
"
TEK HX HD screws install a 4-hole plate on the front and
one in the back of one side of the Floor Assembly.
notE:
Going forward this will be the left side.
C
DETAIL C
SCALE 1 : 2
TOP
CASTER
BRAKE
C
DETAIL C
SCALE 1 : 2
TOP
CASTER
BRAKE
Fig. 2
C
DETAIL C
SCALE 1 : 2
TOP
CASTER
BRAKE
E
DETAIL E
SCALE 1 : 1
#12X1" TEK HX HD SCREW
4 HOLE PLATE
1/4" UP FROM HERE
2" BACK FROM HERE
Fig. 3
