-20-
Model W1850 (For Machines Mfd. Since 06/17)
SE
TU
P
Recommended.CFM.at.Each.Dust.Port:.......... 100.CFM
Dust.Collection
Tools.Needed.
Qty
Shop Vac or Dust Collection System .........................1
Dust Hose 2" .....................................................2
Hose Clamps 2" ..................................................4
To.connect.a.dust.collection.hose,.do.these.steps:
1. Fit 2" dust hose from dust collection system over
sanding disc dust port (see
Figure
22
) and sanding
belt dust port (see
Figure
23
). Secure hoses with 2"
hose clamps.
2. Tug hoses to make sure they do not come off.
Note:.
A tight fit is necessary for proper
performance.
Do not confuse this CFM recommendation with the rating
of the dust collector. To determine the CFM at the dust
port, you must consider these variables: (1) CFM rating of
the dust collector, (2) hose type and length between the
dust collector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines throughout
the system. Explaining how to calculate these variables
is beyond the scope of this manual. Consult an expert or
purchase a good dust collection “how-to” book.
Figure.22.
Sanding disc 2" dust port.
Figure.23.
Sanding belt 2" dust port.
This. machine. creates. substantial.
amounts. of. dust. during. operation..
Breathing. airborne. dust. on. a. regular.
basis. can. result. in. permanent. respira-
tory.illness..Reduce.your.risk.by.wear-
ing.a.respirator.and.capturing.the.dust.
with.a.dust.collection.system.
