-23-
Model W1745W (For Machines Mfd. Since 9/16)
SE
TU
P
24.
Attach handwheel to outfeed table shaft as shown in
Figure 26
,
with pre-installed Phillips head screw and
flat washer.
Figure 26
. Attaching handwheel to
outfeed table shaft.
25.
Thread infeed table lever into adjustment plate
shown in
Figure 27
, and tighten hex nut against
adjustment plate to secure lever in place.
26.
Assemble knife-setting jig as shown in
Figure 28
.
Figure 28.
Assembled knife-setting jig.
Figure 27
. Threading infeed table lever
into adjustment plate.
Hex Nut
Adjustment
Plate