-15-
W1708 Owner's Manual (Mfg. 10/07+)
O
PE
R
ATIO
NS
Sanding Tips
•
Replace the sandpaper with a progressively higher
grit to achieve a finer finish.
• Extend the life of the sandpaper by regularly using
PRO-STICK® abrasive belt cleaners (see
Accessories
on
Page 20
).
• When sanding workpieces with a bow or crown,
place the high point up on the table (prevents the
workpiece from rocking) and take very light passes.
6.
Wears safety glasses and a respirator, and locates
push sticks if needed.
7.
Starts the machine and dust collector.
8.
Holds the workpiece firmly and flatly against both
the table and miter, then pushes the workpiece
along the sanding disc.
9.
Moves the workpiece to different locations on the
sanding disc to wear the sandpaper evenly and to
prevent the sandpaper from overheating.
10.
Stops the machine.
