Shop fox SHOP FOX W1747, Owner'S Manual

Page: 11 / 56

-9-
W1747 20" Planer
EL
EC
TR
IC
A
L
Operating Voltage Amp Draw Min. Circuit Size Plug/Receptacle Extension Cord
220V Operation 30 Amps 40A Hardwire Not Recommended
ELECTRICAL
220V Operation
Extension Cords
We do not recommend using an extension cord for 220V
operation. Instead, hard wire the machine directly to a
power panel that is equipped with a manual shutoff lever
lever and that can be locked in the OFF position.
Grounding
This machine must be grounded! Hardwire this machine
into a power supply circuit that contains a ground cir-
cuit. If you have any questions about correct electrical
installation, contact a qualified electrician for assistance
to make sure all connections are safe and adhere to
required electrical codes.
The Model W1747 operates at 220V. Always connect this
machine to a dedicated circuit with a verified ground,
using the recommended circuit size listed at the bottom
of this page.
Never replace a circuit breaker with one of higher amper-
age without consulting a qualified electrician to ensure
compliance with wiring codes. If you are unsure about
the wiring codes in your area or plan to connect your
machine to a shared circuit, you may create a fire haz-
ard—consult a qualified electrician to reduce this risk.
Electrocution or severe shock could
occur if machine is not grounded.
Replacing an existing circuit breaker
with one rated for higher amperage
may result in a fire. Get help from an
electrician if your circuit will be over-
loaded by the machine.
TURN OFF and LOCK your
master power switch so
no power is available
to the planer before
connecting electrical
wires! If you ignore
this warning serious
electrical shock may
occur, causing injury or
death!
OFF