ASSEMBLY
-13-
General
The main components of the SHOP FOX
®
W1686
are assembled at the factory; however, some
assembly is required.
Table/Trunnion
To attach the table/trunnion assembly:
1.
With the assistance of a helper, carefully lift
the table/trunnion assembly onto the top of
the sander base.
2.
Align the mounting holes in the trunnions
with the mounting holes in the sander base.
3.
Using the (4)
3
⁄
8
"-16 x 1
1
⁄
4
" hex bolts and (4)
3
⁄
8
" lock washers, secure the table/trunnion
assembly to the sander base as shown in
Figure 4
.
NOTICE
DO NOT
overtighten the mounting bolts as
this may strip the threads from the cast iron
components.
Figure 4.
Secure the table/trunnion assembly
to the sander base using the supplied hex
bolts and lock washers.
Safety glasses are
absolutely required dur-
ing assembly. Serious
injury may occur if this
warning is ignored!
Make sure that your
machine remains
unplugged during any
adjustments or mainte-
nance procedures.
Ignoring this warning may
result in serious personal
injury!
Loose clothing and long
hair must be secured
and kept away from
moving parts.
Get assistance before lift-
ing the table/trunnion
assembly. Personal injury
can occur if assistance is
not used when lifting the
table/trunnion assembly.
