-25-
Model W1669/W1670 (For Machines Mfd. Since 04/18)
O
PE
R
ATIO
NS
OPERATIONS
General
This machine will perform many types of operations
that are beyond the scope of this manual. Many of these
operations can be dangerous or deadly if performed
incorrectly.
The instructions in this section are written with the
understanding that the operator has the necessary
knowledge and skills to operate this machine. If at any
time you are experiencing difficulties performing any
operation, stop using the machine!
The overview below provides the novice machine operator
with a basic understanding of how the machine is used
during operation, so the machine controls/components
discussed later in this manual are easier to understand.
Due to its generic nature, this overview is
NOT
intended
to be an instructional guide.
To. reduce. your. risk. of. serious. injury.
or. damage. to. the. machine,. read. this.
entire.manual.BEFORE.using.machine.
To. reduce. the. risk. of. eye. injury. and.
long-term. respiratory. damage,. always.
wear. safety. glasses. and. a. respirator.
while.operating.this.machine.
If you are an inexperienced operator,
we strongly recommend that you read
books or trade articles, or seek training
from an experienced operator of this
type of machinery before performing
unfamiliar operations.
Above.all,.safety.
must.come.first!
To.complete.typical.operation,.operator.does.following:.
1.
Examines workpiece to make sure it is suitable for
drilling.
2.
Puts on required safety glasses and face shield.
3.
Firmly
secures workpiece to table using a vise or
T-slot clamps.
4.
Installs correct cutting tool for operation.
5.
Adjusts table to correct height, then locks it in
place.
6.
Selects appropriate spindle speed according to V-belt
configuration chart located inside belt cover.
7.
Connects machine to power, and starts spindle
rotation in proper direction for cutting tool installed.
8.
Begins
drilling.
9.
When finished, stops spindle rotation and
disconnects machine from power.
