-3-
M1104, M1105, M1106 Heavy-Duty Bench Grinder
SAFETY
SAFETY
READ MANUAL BEFORE OPERATING MACHINE.
FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL
RESULT IN PERSONAL INJURY.
Standard Safety Instructions
1. THOROUGHLY READ THE INSTRUCTION MANUAL BEFORE OPERATING YOUR MACHINE.
Learn the
applications, limitations and potential hazards of this machine. Keep the manual in a safe and con-
venient place for future reference.
2.
KEEP WORK AREA CLEAN AND WELL LIGHTED.
Clutter and poor lighting invite potential hazards.
3.
GROUND ALL TOOLS.
If a machine is equipped with a three-prong plug, it must be plugged into a
three-hole grounded electrical receptacle or grounded extension cord. If using an adapter to aid in
accommodating a two-hole receptacle, ground using a screw to a known ground.
4.
WEAR EYE PROTECTION AT ALL TIMES.
Use safety glasses with side shields or safety goggles that
meet the appropriate standards of the American National Standards Institute (ANSI).
5.
AVOID DANGEROUS ENVIRONMENTS.
Do not operate this machine in wet or open flame environ-
ments. Airborne dust particles could cause an explosion and severe fire hazard.
6.
ENSURE ALL GUARDS ARE SECURELY IN PLACE
and in working condition.
7.
MAKE SURE SWITCH IS IN THE OFF POSITION
before connecting power to machine.
8.
KEEP WORK AREA CLEAN,
free of clutter, grease, etc.
9.
KEEP CHILDREN AND VISITORS AWAY.
Visitors must be kept at a safe distance while operating
unit.
10.
CHILDPROOF YOUR WORKSHOP WITH PADLOCKS
, master switches or by removing starter keys.
11.
STOP AND DISCONNECT THE MACHINE WHEN CLEANING, ADJUSTING OR SERVICING.
Indicates an imminently hazardous situation which, if not avoided, WILL
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, COULD
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, MAY
result in minor or moderate injury.
This symbol is used to alert the user to useful information about proper
operation of the equipment, and/or a situation that may cause damage
to the machinery.
NOTICE
Summary of Contents for SHOP FOX M1104
Page 2: ......
Page 21: ...19 PARTS M1104 M1105 M1106 Heavy Duty Bench Grinder M1104 M1105 M1106 Parts Diagram...
Page 27: ......
Page 28: ......
