SHOEI Neotec II Instructions For Use Manual Download Page 2

3

2

This product is a motorcycle helmet.

Do not use it for any purposes other than riding 

a motorcycle. If you use the helmet for any other 

purpose, it may not provide sufficient protection in 

case of an accident.

No helmet can protect the wearer 

against all foreseeable high speed and 

low speed impacts.

For maximum head protection, the helmet must fit 

properly and the retention system must be securely 

fastened under the chin. The helmet should allow 

sufficient peripheral vision when secure on your 

head. If your helmet is too large, it may slip or move 

on your head while riding. This could cause your 

helmet to come off in an accident or obstruct your 

vision while riding resulting in personal injury or 

death. To learn to properly wear and secure your 

helmet, see the booklet “How to Use Your Helmet 

Properly” that is packed with your helmet.

The contents of this manual are subject to change 

without notice.

The illustrations in this manual may differ from the 

actual product.

The copyrights for this manual belong to SHOEI CO., 

LTD. Reproduction or copying of this manual without 

written permission is strictly prohibited.

After opening the product box, please confirm that all 

parts and accessories are included.
1. Helmet
2. PINLOCK

®

 EVO lens

3. Breath Guard
4. Helmet Bag
5. Instruction Manual
6. “How to use your helmet properly”

7. Warning Label (E-3 tag: for ECE R22 Products)
8. SHOEI logo stickers (2)

9. Silicon Oil
10. PINLOCK

®

 Pin

11. Service Tool

We recommend that you save the box and 

its cushioning material in case you need to 

ship the product or its parts for repair. If you 

dispose of these materials, please follow 

the proper laws and regulations.

Read This First

Confirm the Packed Items

HOW TO USE

YOUR HELMET PROPERLY

WARNING

1

4

5

6

7

8

9

10

11

2

3

Summary of Contents for Neotec II













Reviews: