manualshive.com logo in svg

SHOEI Neotec II, Instructions For Use Manual, Page: 10 / 12

Share
Download
SHOEI Neotec II Instructions For Use Manual Download Page 10

19

18

Installing Interior Parts 

1. Installing the Chinstrap Covers

The chinstrap covers have different shapes on

the right and left sides of the helmet. Referring

to the drawing, identify the right and left sides.

Pass the chinstrap through the cover and fasten 

the snap until it clicks in place.

2. Installing the Center Pad

Adjust the side of the front plate to bracket 

(Drawing 8), and slide and insert the plate into a 

gap of bracket (Drawing 9).

3. Installing the Ear Pads

The ear pads are interchangeable for right and

left sides. Place ear pad section (A) between

the center pad and the impact absorbing liner

as per Drawing 11. Insert the 4 clasps on the

plate in the notches of the cheek base. Fix the

ear pad in place. Install the other ear pad in the 

same manner.

3. Removing the Center Pad

Remove the center pad by unsnapping 2 snaps 

at the rear of the helmet first (Drawing 5), and

pull the front portion of the center pad from the

holding plate as per Drawing 6.

4. Removing the Chinstrap Covers

Remove the cheek pad then unfasten the

chinstrap cover snap. Remove the cover from

the chinstrap (Drawing 7). Remove the other 

chinstrap cover in the same manner.

9

8

10

(A)

11

6

5

7

Front

Rear

Hook

Hook

Plate

Chinstrap

Hook

Chinstrap Cover

Chinstrap Cover (R)

Chinstrap Cover (L)

Plate

Summary of Contents for Neotec II













Reviews:

No comments