Shively Labs 6822, Instruction Manual Installation, Operation, & Maintenance, Page: 23 / 78

15
Bay Assembly
Figure 12. Mount attachment,
pipe size 3-1/2" to 6"
Attach the bay arms.
CAUTION
Do not loosen the hose clamps or move the sliding V-arms. This will spoil
the performance of your antenna.
a. Locate the inner and outer dipole arms ( Figure 13 , 7 ). The sliding V-arms
( 18 ) on each dipole arm are factory-assembled and adjusted for proper
performance (all the same), and secured with hose clamps ( 19 ).
b. Using upper arm clamps ( 6 ) and 5/16-18 hardware ( 1 , 2 , 3 , and 4 ), attach
the two dipole arms ( 7 ) to the saddles on the bay weldment ( 5 ) as shown.
Tighten in accordance with Table 1 .