Remove all travel protection blocks from
bottom edge of panels.
1. Ensure that your base is firm and
absolutely level.
2. Lay floor of building on base.
3. Pre drill panels in 2
places, top and bottom.
4. Place back panel onto
floor ensuring the clad-
ding has overhung the
floor. The front and back
panels extend from floor
edge to floor edge.
5. Place side panel next to back panel and
join together from the inside using 2 x 60 mm
screws
6. Place other side in position and join to back
panel from the inside using 2 x 60 mm
screws.
7. Place front panel in position and join to
side panels from the inside using 2 x 60 mm
screws per side.
1. Place two 44 x 44 x 820 mm pieces of
framework on a flat level surface. Position two
44 x 44 x 1319 mm pieces of framework
between the 820 mm pieces. Secure together
using 4 x 80 mm screws, one at each end.
2. Position side rail within framework. Secure
together through the frame into railing frame-
work at the top and bottom using 2 x 80 mm
screws per side.
3. Repeat for other side rail.
1. Place two 44 x 70 x 889 mm pieces of
framework on a flat level surface. The 44 mm
side will be facing upwards. Position two 44 x
70 x 1319 mm of framework inside the 889
mm pieces. Secure together using 8 x 80 mm
screws, two per end.
2. Secure front rail within the frame as per
side rail.
3. Repeat for other front rail.
1. Position verandah floor against front of
building.
2. Place side railing against front of building
inline with edge of verandah floor. Secure to
front panel of using 2 x 60 mm screws, one at
the top and one at the bottom.
3. Secure side railing to verandah floor
through floor bearers using 2 x 60 mm
screws. You will need to position the screws
at an angle.
4. Repeat for other side rail.
5. Place front railing against side railing,
ensuring rail is flush and square. Secure rails
together through side railing using 2 x 60 mm
screws, one at the top and one at the bottom.
6. Secure front railing to verandah floor
through floor bearers using 2 x 60 mm
screws. Again you will need to position the
screws at an angle.
7. Repeat for other front rail.
A Floor & Walls
B Verandah Side Railing
C Verandah Front Railing
D Verandah Assembly
820
1319
889
1319
44
SIDE
VIEW
70
