4
FRONT PANEL
FRONT PANEL
1. POWER SWITCH:
The power switch turns the unit on and off and indicates that the switcher is receiving power. The switcher will remember
that last state during a power cycle. When power is removed and resorted, the last configuration will be evoked.
2. STATUS DISPLAY:
Front panel status display shows current matrix routing configuration. This same display also shows particular
configuration settings depending on your current function. In run mode (as shown above), the display shows each Output (destination)
channel and shows which input (source) it is assigned to.
3. IR SENSOR:
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
4. INPUT STATUS DISPLAY:
Input sources 1 to 8 LED illuminates blue to indicate that a video source is present on that input.
5. SOURCE SELECT BUTTONS:
Separate inputs 1 thru 8 select buttons are provided each source selection.
6. EDID MODE SELECT BUTTONS:
Used to select EDID mode using buttons Source button #1 or #2.
7. DESTINATION SELECT BUTTONS:
Separate outputs 1 thru 4 select buttons are provided for each destination assignment. Routing can be
source to destination or one source to multiple destinations.
Example:
Press Destination 1, 3, 4, then press Source 2. It will route Input 2 to Output 1, 3, 4 respectfully.
8. 19 INCH EAR MOUNT PAIR:
Converts desktop to 19 inch rack mount. Bracket (part number: 1U-440L) INCLUDED. Image shows rack
mount bracket attached.
