7
BACK PANEL
BACK PANEL
1. POWER INLET:
The switcher is fitted with a AC power plug input
connector. Ensure that the plug used is of an approved type and is of
sufficient current carrying connector capacity with the correct voltage
and connector polarity. 100~240Volt AC, 50/60Hz power supply.
2. IR EXTENDER CONTROL:
Supports one IR Extender. Extends a
maximum distance of ~984 feet/300M. When you plug the external IR
extender into the switcher the front panel IR receiver remains active.
3. RS-232 CONNECTION:
RS-232 control port allows for interfacing to
a PC, such as a computer or touch panel control, to the switcher via
the DB-9pin female connector for serial RS-232 control.
4. ETHERNET CONNECTION:
ETHERNET control port allows for TCP/
IP interfacing to a PC, such as a computer or touch panel control
(not a web-browser), to the switcher via this RJ-45 female connector
to control switcher.
5. INPUTS 1, 2, 3, 4, 5, 6, 7, & 8 HDMI:
Connects a HDMI signal source
to the Input. The HDMI ports support HDMI with embedded audio
and DVI with AUX audio sources. If you remove the HDMI screw
posts, you must use the provided HDMI Locking Post replacement
screws to keep the internal HDMI jack secure. Removing the HDMI
screws without installing the HDMI Locking Post replacement
screws will void your warranty.
6. OUTPUTS- 1, 2, 3 & 4 HDMI:
Connects a HDMI signal source to the
Output. The HDMI ports support HDMI with embedded audio and
DVI with AUX audio. If you remove the HDMI screw posts, you
must use the provided HDMI Locking Post replacement screws to
keep the internal HDMI jack secure. Removing the HDMI screws
without installing the HDMI Locking Post replacement screws will
void your warranty.
7. PREVIEW OUTPUT-01 HDMI:
Connects a HDMI digital video/audio
signal link direct to the HDMI Female connector. This connector
supports HDMI digital video/audio and DVI digital video sources.
HDMI Preview port signal is the same as Output 1. If you remove
the HDMI screw posts, you must use the provided HDMI Locking
Post replacement screws to keep the internal HDMI jack secure.
Removing the HDMI screws without installing the HDMI Locking
Post replacement screws will void your warranty.
POWER SOCKET:
Connector Type: IEC 60320 C13
IR EXTENDER JACK:
Female jack - inner OD Ø
3.5mm
This port is also for firmware updates
REMOTE PORT:
D-SUB-9pin female connector
REMOTE PORT:
Control the switcher with the
RJ-45 female connector
ETHERNET PORT:
Note: the Ethernet port and RS-
232 port cannot be used simultaneously. Any
connection to the Ethernet port will disable
serial commands sent to the RS-232 port.
HDMI CONNECTOR:
HDMI Type A SMD 19pin
female socket connector
Note: With the proper adapters, the switcher
can be used with DVI digital video signals, as it
is HDCP compliant. DVI supports audio.
HDMI CONNECTOR:
HDMI Type A SMD 19pin
female socket connector
Note: With the proper adapters, the switcher
can be used with DVI digital video signals, as it
is HDCP compliant. DVI supports audio.
HDMI DIGITAL VIDEO/AUDIO CONNECTOR:
HDMI
female connector.
Note: With the proper adapters, the switcher
can be used with DVI digital video signals, as it
is HDCP compliant. DVI does not support audio.
