14
EDID FUNCTION
EDID FUNCTION: LEARNING MODES
LEARNING EDID MODE-#1
Learning EDID From Destination To Source
Single Learning Mode#1 EDID setup
Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned from the Destination port to the Source port.
1.
Press
EDID > DESTINATION
Button: The LCM will
show LEARNING.
2
. Press
DESTINATION (#1 THRU #4)
. The LCM will show the LEARNING HDMI. The switcher
will LEARN destination HDMI EDID.
3.
Press
SOURCE (#1 THRU #8)
. The switcher will Learn destination HDMI EDID and pass to
the selected source.
4.
Press
ENTER
to confirm changes.
The LCM will return to the default screen showing selected
matrix routing status.
NOTE: The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For Example:
When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and
the EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes
when you want to remove the learning EDID memory from EPROM.
LEARNING EDID #2
Passing EDID From Destination To Source
Multiple Learning mode #2 EDID setup
Key Press Sequence:
EDID > OFF > DESTINATION #1 THRU #4 > ENTER
The EDID for HDMI has been Learned from the Destination port to the Source port.
1.
Press
EDID
Button: The LCM will
show LEARNING.
2.
Press
OFF
Button:
The LCM will show the current EDID LEARN status.
3.
Press
DESTINATION (#1 THRU #4).
The switcher will LEARN destination HDMI EDID and
pass to the selected source. The switcher will Enable or Disable HDMI EDID for the selected
source.
4.
Press
ENTER
to confirm changes.
The LCM will return to the default screen showing selected
matrix routing status.
NOTE: When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and
the EDID data will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination
to source or Disable the LEARNING.
