6
FRONT PANEL
FRONT PANEL
13. FUNCTION KEY - MEMORY:
The system will show stored presets, up to a total of 32. Presets are stored in local memory
using Source keys 1 thru 16 or Destination keys 1 thru 16 as the memory preset location.
- Configure desired matrices.
- Press
MEMORY
button.
- Press
1 THRU 16
on either Source or Destination row.
- Press
ENTER
to ready memory location.
- Or press
MEMORY
again to cancel operation.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
- Or press MEMORY again to cancel operation.
14. FUNCTION KEY - LOCK:
- Press and hold
LOCK
button for two seconds lock out the front panel.
- Press and hold
LOCK
button for two seconds to enable the front panel.
15. FUNCTION KEY - EDID:
- Press
EDID
to begin setting up your EDID mode. Use source row buttons #1 and #2 to
cycle thru the options. (Go EDID setup instructions.)
