4
FRONT PANEL
FRONT PANEL
1. POWER ON SWITCH:
The power switch turns the unit on and off. The LCM will illuminate blue to indicate the switcher is ON and receiving
power. The switcher will remember the last setting during a power cycle. When power is removed and resorted, the last configuration will
be evoked.
2. STATUS DISPLAY:
Front panel status display shows current matrix routing configuration. This same display also shows particular
configuration settings depending on your current function. In run mode (as shown above), the display shows each Output (destination)
channel and shows which input (source) it is assigned.
3. IR SENSOR:
The IR sensor receives IR commands from the supplied remote controller or a third party IR emitter.
4. INPUT STATUS DISPLAY:
Input source 1 to 16 LED illuminate white to indicate a video source is present on that input.
5. SOURCE SELECT BUTTONS:
Input 1 thru 16 buttons are provided for each source selection.
6. EDID MODE SELECT BUTTONS:
Used to select EDID mode using buttons Source button #1 or #2.
7. DESTINATION SELECT BUTTONS:
Separate outputs 1 thru 16 select buttons are provided for each destination assignment. Routing can be
Source to Destination or one source to multiple destinations.
Example:
Press Destination 1, 8, 12 then press Source 2 will route Input 2 to Output 1, 8, 12 respectfully.
8. 19 INCH EAR MOUNT PAIR:
Converts desktop to 19 inch rack mount. Bracket (part # 4U-440L) INCLUDED. Image shows rack mount
bracket attached.
