24
EDID FUNCTION
Press:
Enter button
4.
Press
ENTER
to confirm changes. The LCM will return to the default
screen selected switch routing status.
NOTE: The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For example;
When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and
the EDID data cannot change.
Please select new learning destination to sources or change to one of the embedded EDID modes when you want to remove the
learning EDID memory from EPROM.
EDID FUNCTION : LEARNING EDID MODE-1 - SINGLE TO MULTIPLE
Learning Mode-1 Single Destination to Multiple or All Sources
Key Press Sequence:
EDID Destination 1 thru 16 Destination 1 thru 16 Source 1 thru 16 Enter
The EDID for HDMI or HDBaseT
™
has been learned from the Destination port to the Source port.
Press:
EDID button
1.
Press
EDID
button. The LCM will show the current EDID status.
Press:
Destination
button
Press:
Destination
button again
2.
Press
DESTINATION
(#1 ~ #16).
The LCM will show the LEARNING HDMI Switcher will Learning destination
(3) HDMI EDID.
Press
DESTINATION
(3) button again.
The LCM will show the LEARNING HDBaseT
™
Switcher will Learning
destination (3) HDBaseT
™
EDID.
Press:
Source button
3.
Press
SOURCE
(#1 ~ #16).
The LCM will show the selected sources.
Example: Select Source 1, 3, 5 & 7. Switcher will learn the destination EDID
HDMI or HDBaseT
™
EDID and pass to the selected source.
Press:
Enter button
4.
Press
ENTER
to confirm changes. The LCM will return to the default
screen selected switch routing status.
NOTE: The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For example;
When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and
the EDID data cannot change.
Please select new learning destination to sources or change to one of the embedded EDID modes when you want to remove the
learning EDID memory from EPROM.
