SHINOLA Detroit, Manual

Page: 9 / 119

16 17
A
B
Second Hand
Minute hand
Hour hand
Minute counter
Second counter
1/10 Second counter
Running for the first 30 sec.
Hour counter after 30 min.
Date
ADJUSTING THE CHRONOGRAPH HANDS TO ZERO
1 Pull crown out to position III .
(All four chronograph hands are in
their correct or incorrect zero position.)
2 Keep push-buttons A and B depressed
simultaneously for at least 2 seconds.
(The center stop-second rotates by
360° - corrective mode is activated.)
3 Press push-button A to single step the
center stop-second hand. Press and
hold push-button A to advance the center
stop-second hand quickly.
3b
Press
push-button B to advance to the next hand.
Press push-button A to single step the 1/10 second counter hand.
Press and hold push-button A to advance the 1/10 second hand quickly.
4b Press push-button B to advance to the next hand.
Press push-button A to single step the minute counter hands.
Press and hold push-button A to advance the minute counter
hands quickly.
Return the crown to position I .
BASIC FUNCTION (START / STOP / RESET)
Example
1
Start: Press push-button
A
.
2
Stop: to stop the timing, press push-button
A
.
once more and read the three chronograph
counters: 7 hr. / 20 min. / 5 sec.
3
Zero positioning: Press push-button
B
.
(The three chronograph hands will
be reset to their zero positions.)
SETTING THE TIME
1 Pull out the crown to position III .
(The watch stops.)
2 Turn the crown until you reach the
correct time.
3 Push the crown back to position I .
SETTING THE DATE
1 Pull out the crown to position II .
(The watch continues to run.)
2 Turn the crown until the correct date appears.
3 Push the crown back to position I .
4 If setting the date between 9:00 p.m. and 12:00 a.m., follow steps 1
through 3, but be sure to set the date to the following day.
CHRONOGRAPH MODEL 5040.D
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
I
(= normal position).
- the four chronograph hands are
precisely at zero position following
activation of push-button B . If the
hands are not precisely at zero,
their positions must be adjusted.
(See the chapter Adjusting the
Chronograph Hands to Zero.)
II III I
3
1
2
II
1
2
3
1
3
1
2
A
B
1
2
3
II III I
1
2
3 4
5
6
A
2
B
3b
4b
6
4
5