Shinko WCL-13A Instruction Manual Download Page 3 | Manualshive

Page: 3 / 71

background image

3

Warning

• To prevent an electric shock or fire, only Shinko or other qualified service personnel may handle the inner

assembly.

• To prevent an electric shock, fire or damage to the instrument, parts replacement may only be undertaken

by Shinko or other qualified service personnel.

SAFETY PRECAUTIONS

• To ensure safe and correct use, thoroughly read and understand this manual before using this instrument.

• This instrument is intended to be used for industrial machinery, machine tools and measuring equipment.

Verify correct usage after purpose-of-use consultation with our agency or main office. (Never use this
instrument for medical purposes with which human lives are involved.)

• External protection devices such as protective equipment against excessive temperature rise, etc. must

be installed, as malfunction of this product could result in serious damage to the system or injury to
personnel. Also proper periodic maintenance is required.

• This instrument must be used under the conditions and environment described in this manual. Shinko

Technos Co., Ltd. does not accept liability for any injury, loss of life or damage occurring due to the
instrument being used under conditions not otherwise stated in this manual.

Caution with respect to Export Trade Control Ordinance

To avoid this instrument from being used as a component in, or as being utilized in the manufacture of
weapons of mass destruction (i.e. military applications, military equipment, etc.), please investigate the end
users and the final use of this instrument. In the case of resale, ensure that this instrument is not illegally
exported.

«
1
2
3
4
5
...
»

Summary of Contents for WCL-13A








































































Reviews:

No comments

Related manuals for WCL-13A

Brand: ABATEC Pages: 8

Brand: M&C Pages: 16

Brand: Datalogic Pages: 15

Brand: Fanimation Pages: 2

Brand: M2M Pages: 24

Brand: S&P Pages: 12

Brand: S&C Pages: 34

Brand: S&C Pages: 32

IntelliCap Plus

Brand: S&C Pages: 32

Brand: S&P Pages: 12

Brand: S&C Pages: 35

Brand: Xilinx Pages: 2

sensoCOMFORT VRC 720/3

Brand: Vaillant Pages: 64

Brand: SYR Pages: 2

Brand: Ascon tecnologic Pages: 16

Brand: KIOUR Pages: 3

Brand: Topway Pages: 14

Brand: Wave Home Solutions Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands