![background image](http://html.mh-extra.com/html/shinko/wcl-13a/wcl-13a_instruction-manual_1258205024.webp)
24
8. Setup
Setup should be done before using this controller, to set the input type, Alarm type, and control action, etc.
of CH1 and CH2 according to the users’ conditions.
Setup can be conducted in the CH1, CH2 function groups and Special function group.
If the users’ specification is the same as the default value of the WCL-13A, it is not necessary to set up
the controller. Proceed to Chapter “9. Settings”.
8.1 Turn the Power Supply to the WCL-13A ON.
• For approx. 4 seconds after the power is switched ON, the sensor input characters and temperature
unit are indicated on the PV/SV display of CH1 and CH2. (Table. 8.1-1) (Table. 8.1-2)
During this time, all outputs and LED indicators are in OFF status.
• After that, the item selected during Display selection is indicated.
(Table. 8.1-1) Multi-range Input
Sensor Input
PV/SV Display
Setting Range
PV/SV Display
Setting Range
K
J
R
S
B
E
T
N
PL-
C(W/Re5-26)
-200
to 1370
-199.9 to 400.0
-200
to 1000
0
to 1760
0
to 1760
0
to 1820
-200
to 800
-199.9 to 400.0
-200
to 1300
0
to 1390
0
to 2315
-320
to 2500
-199.9 to 750.0
-320
to 1800
0
to 3200
0
to 3200
0
to 3300
-320
to 1500
-199.9 to 750.0
-320
to 2300
0
to 2500
0
to 4200
Pt100
JPt100
Pt100
JPt100
-199.9 to 850.0
-199.9 to 500.0
-200
to 850
-200
to 500
-199.9 to 999.9
-199.9 to 900.0
-300
to 1500
-300
to 900
4 to 20mA DC
0 to 20mA DC
0 to 1V DC
0 to 5V DC
1 to 5V DC
0 to 10V DC
-1999 to 9999
(Table 8.1-2) Infrared Thermocouple (Infrared TC) Input
RD-300 Series,
RD-401
PV/SV Display
Setting Range
-18 to 25
5 to 45
25 to 80
70 to 105
90 to 120
115 to 155
145 to 190
180 to 250
-50 to 500
-50 to 500
-50 to 500
-50 to 500
-50 to 500
-50 to 500
-50 to 500
-50 to 500
-18 to 25
5 to 45
25 to 80
70 to 105
90 to 120
115 to 155
145 to 190
180 to 250
-58 to 932
-58 to 932
-58 to 932
-58 to 932
-58 to 932
-58 to 932
-58 to 932
-58 to 932