- 26 -
5. Outline of Key Operation and Each Mode
5.1
Outline of Key Operation
(Fig. 5.1-1)
Monitor Mode
(*2)
PTN key
RUN Mode
Program control STOP
(in Standby)
Program control RUN
RUN key (*1)
STOP key
(1 sec)
MV indication
Remaining time
indication
PTN key
PTN key
Setting Mode
Pattern setting
mode (*3)
Event setting mode
(*3)
Control parameter
setting mode (*3)
Engineering
setting mode 1 (*3)
Engineering
setting mode 2 (*3)
MODE key
RST key
RST key
RST key
RST key
RST key
MODE key
(3 sec)
+ MODE keys
+ MODE keys
(3 sec)
+
+ MODE keys
(3 sec)
Data clear (*4)
+
+ STOP keys
(3 sec)
Automatically returns to RUN mode after data clear.
MODE key
MODE key
MODE key
MODE key
MODE key
(*1) Select a pattern number with the PTN key, and press the RUN key. Program control will start.
(*2) Effective during Program control RUN.
(*3) If the MODE key is pressed, settings or selections are registered, and moves to the next setting item.
If the MODE key is pressed at the last setting item in each setting mode, the unit returns to the 1st setting item.
If the DISP key is pressed, settings or selections are registered, and moves back to the previous setting item.
If the DISP key is pressed at the 1st setting item in each setting mode, the unit moves back to the last setting
item.
(*4) Effective during program control STOP (in Standby).
Wait parameter
setting mode (*3)
RST key
+
keys
(3 sec)
MODE key