26
9.2 Set a reference weight by entering a value
You can enter a reference weight in the balance, and then make the display indicate the weight
percentage (%) of a sample with respect to the reference.
1. Displaying a reference sample weight.
Make sure that the [%] sign is displayed and press
and hold the Function key for a few seconds.
(This operation may be performed with a container
placed on the balance.)
The display then blinks [P. SEt].
The previously-saved reference sample weight
blinks.
2. Enter a reference weight.
Press the Zero/Tare key.
The digit furthest to the right blinks.
3. Select a number.
Press the Zero/Tare key.
Pressing the key changes the displayed
number as shown on the right.
4. Select digit places to specify a reference weight.
Pressing the Function key shifts the blinking digit to
the left, allowing you to set a higher-order digit.
If the digit furthest to the left is blinking, pressing
the key makes the digit furthest to the right blink.
5. Save the reference weight.
Press the Set key.*
(* Pressing the Print key cancels the setting of a
reference sample weight.)
6. Put a sample to weigh on the balance.
Put a sample to weigh on the balance.
The display indicates the weight percentage (%) of
the sample with respect to the reference.
Pressing the Function key toggles the display
between percentage weight and total weight.
Decimal point
Continuous
press
Key released
