SHINING 3D
-
EinScan H V1.0.4.4-User Manual
-
May 2021
27
5.3.2.
Body Scan
Body scan mode is recommended to scan human body. The alignment algorithm under this mode was
defaulted set to process non-rigid objects those shapes may change a little bit due to breathing or
slight deviation.
Note:
⚫
For better performance, wearing clothes with low contrast. For example, scan white and black
color, it requests brightness adjustment when switching to each other. Hair cannot be captured
in good quality in this mode.
⚫
For long hair covering your body, wrap your hair before scan.
5.3.3.
Face Scan
Operation Guide
After creating a new face scan project (Feature alignment), a prompt interface shows. To not show
prompt interface again, click
Do not prompt again
and
close the interface. To show the prompt
interface again, click
Tips
on the upper right corner of face scan interface.
Function and Requirements of Scanned Objects
Face Scan mode is utilizing infrared light source for 3d capturing, which is good to scan human face
without any visible light, very comfortable to eyes. Face scan contains feature scan mode and marker
scan mode, and feature align mode uses non-rigid body scan. It can help capture hair data. Straight,
silky hair is easier to be scanned. Under face scan mode, you can still scan other targets, not only
human face.
Stick markers onto the object and use marker align when there is not enough feature for feature align.
See Standard scan.
