OFS-80
Optical Fiber Fusion Splicer User’s Manual
Shineway Technologies, Inc.
- iv -
safety instructions. Not taking any safety precautions or following the instructions will
violate the safety standards of design, manufacturing and application of these instruments. In
no case will Shineway Technologies bear the responsibilities for consequences incurred by
violation of the following instructions.
General
This product is a Safety Class 3 instrument. The protective features of this product may be
impaired if it is used in a manner not specified in the operation instrument.
Environmental Conditions
It is designed to operate at a maximum relative humidity of 95% and at altitudes of up to
5000 meters. For more details, please refer to the specifications tables.
Before Applying Power
Verify that the product is set to match the available line voltage, the correct fuse is installed,
and all safety precautions are taken. Note the instrument’s external markings described
under Symbols.
Do Not Operate in an Explosive Atmosphere
Do not operate the instrument in the presence of flammable gases or fumes.
Do Not Remove the Instrument Cover
Operating personnel must not remove instrument covers. Component replacement and
internal adjustments must be made only by qualified service personnel.
Safety Terms Used in This Manual
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in personnel injury. Do not proceed beyond a
WARNING sign until the indicated conditions are fully understood
and met.
