Shindaiwa M2510/EVC, Owner'S/Operator'S Manual

Page: 12 / 60

12
The the spark plug
and adjust the gap at
the electrode
10/15 hour maintenance
0.6–0.7 mm
(0.024–0.028 inch)
Maintenance (continued)
10 hour maintenance
Loosen
thumbscrews
(more frequently in dusty conditions)
Remove the air cleaner cover by loos- 1.
ening the two thumbscrews.
Remove and inspect the pre-filter. If 2.
the pre-filter is torn or otherwise dam-
aged, replace it with a new one.
Clean the pre-filter with soap and a.
water. Let dry before reinstalling.
Inspect the air cleaner element. If 1.
the element is damaged or distorted,
replace it with a new one.
Tap filter gently on a hard surface to 2.
dislodge debris from element or use
compressed air from the inside to
blow debris out and away from the air
cleaner element.
Install the air cleaner element, pre- 3.
filter and cover in the reverse order of
removal.
$LU¿OWHU
element
3UH¿OWHU
IMPORTANT!
Direct the air stream at the inside face of
the filter only!
CAUTION!
Never operate the unit if the air cleaner
assembly is damaged or missing!
Enlever et nettoyer la bougie.
Enlever et nettoyer la bougie. Con-
Ŷ
sulter la section “ Caractéristiques
techniques ” pour le type correct de
bougie d’allumage et pour l’écart
d’électrode correct.
MISE EN GARDE !
Avant d’enlever la bougie, nettoyer
O¶DLUHDXWRXUGHODERXJLHD¿QG¶pYLWHU
TXHGHVVDOHWpVRXGHVSRXVVLqUHVQH
VHORJHQWjO¶LQWpULHXUGXPRWHXU