Shindaiwa F226S, Operator'S Manual

Page: 26 / 116

24
Specifications
Specifications
These specifications are subject to change without notice.
F226S
External dimensions:
Length × Width × Height mm 1460 × 320 × 575
Mass:
Unit without cutting attachment and shield (ISO 11806)
Unit with fuel, specified cutting attachment, shield and
harness
kg
kg 4.3
5.1
Volume: Fuel tank L 0.4
Cutting attachment:
Nylon line cutting head
Line diameter
Line length
Thread
mm
m
G137
3.0
2 ×1 line
Right-handed thread 3/8×24UNF
Gear ratio: Gear ratio and lubrication 1 good quality lithium grease
Rotational direction of output shaft seen from above: clockwise
Engine: Type Air cooled 2-stroke single cylinder
Engine displacement
Maximum shaft brake power, measured in accordance
with ISO 8893
Engine speed at maximum engine power
Recommended engine idling speed
mL (cm
3
)
kW
r/min
r/min
21.2
0.71
8000
3000
Recommended maximum engine speed (With STD at-
tachment installed)
r/min 7200
Carburettor
Ignition
Spark plug
Starter
Clutch Diaphragm type
Flywheel magneto - CDI system
NGK BPMR8Y
Recoil starter
Automatic centrifugal clutch
Fuel:
Oil
Ratio
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing
methyl alcohol or more than 10 % of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Stand-
ard (ISO/CD 13738), JASO FC,FD grade and
Shindaiwa One 50 : 1 oil.
50 : 1 ( 2% )
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power L/h
g/(kW•h) 0.45
469
Sound pressure level: (ISO 22868) L
pAeq
dB(A) 91.9
Guaranteed sound power level: (ISO 22868) L
WA
dB(A) 108
Vibration levels: (ISO 22867)a
hv,eq
m/s
2
m/s
2
Front handle 4.9
Rear handle 5.4