Shindaiwa DGW400DMK, Owner'S And Operator'S Manual

Page: 7 / 48

- 4 -
Caution: Injury

Use this equipment with it situated on a stable level surface so that it is prevented
from moving.

Do not move the equipment during operation.

Always be sure to turn off the switches of all devices using the equipment and turn off
the equipment breakers before starting the engine.

Always be sure to turn off the power switches of all devices using the equipment
when turning on the equipment breakers. Leaving on the power switch of a device
using the equipment when the equipment breakers are turned on could result in the
sudden operation of the corresponding device.

Do not leave on the power switch of a device using the equipment and do not
connect a device to an AC output receptacle.

The lifting lug is designed to be used only for lifting the equipment. Do not lift the
equipment with any heavy items (such as a trailer, gas canister and additional fuel
tank) added to the equipment.

Always be sure to use the lifting lug when lifting the equipment, and lift slowly and
directly straight above.

Wear a helmet, safety shoes, gloves and similar protective gear when performing
lifting work. Do not stand or get under the equipment while it is suspended.

Securely fix the equipment with rope or similar item so that it cannot move when
transporting by truck or other vehicle.
Caution: Injury to Eyes and Skin

Always be sure to wear arc-proof glasses, clothes that completely cover the skin and
other protective gear when welding to protect the eyes and skin from harmful light
rays generated during welding.

Always be sure to wear leather gloves, apron, shoe covers, arc-proof glasses (face
shield), safety shoes, hard hat and long-sleeve clothing to protect against the
scattering of weld spatter that occurs during welding.
Caution: Physical and Secondary Damage

Do not use the equipment for any improper applications. Improper usage can result in
an accident or malfunction.

Do not connect the AC power source to indoor wiring.

If using the equipment as a power source for medical equipment, you must check
with the medical equipment manufacturer, doctor and hospital before using the
equipment.

Set the frequency in accordance with the devices using the equipment.